67 Series Ultra-Precision Ball Bearings | Robotics & Optical Devices

6702-ZZ Ultra-Thin Section Ball Bearing | 15×21×4 mm for Drones & Precision Instruments
The 6702-ZZ is a specialized, ultra-lightweight deep groove ball bearing engineered for modern applications that demand minimal spatial footprint and maximum rotational efficiency. Featuring dual non-contact metal shields (ZZ), this model effectively retains premium factory grease while delivering significantly lower rotational friction than standard rubber-sealed variants. Measuring 15mm on the bore, an outer diameter of 21mm, and a remarkably slim 4mm width, the 6702-ZZ is an essential component for UAV mechanisms, gimbal stabilizers, and sophisticated medical devices where consistent, low-torque operation is critical.

Hot Tags : 6702-ZZ Extra Thin Bearing Shielded Micro Bearing 15mm Low Torque Chrome Steel Bearing 15x21x4 Ball Bearing Drone Gimbal Bearings NSK 6702ZZ Equivalent
Read More
677-ZZ Thin-Section Miniature Ball Bearing | Low-Torque Precision | 7×11×3 mm
The 677-ZZ is a high-precision, thin-walled miniature bearing engineered for applications that require a larger shaft diameter within a restricted outer housing. Equipped with dual metal shields (ZZ), this 7×11×3 mm component provides a reliable barrier against dry contaminants without sacrificing rotational speed. The non-contact design of the steel shields ensures that the bearing maintains ultra-low starting torque, making it an essential part for battery-sensitive devices and high-frequency micro-motors where thermal management and energy efficiency are paramount.

Hot Tags : 7x11x3 mm Thin Section Bearing Ultra Slim 677ZZ Ball Bearing Metal Shielded 677-ZZ Bearing Precision P5 Miniature Bearing 7mm Bore High Speed Bearing Drone Motor Replacement Bearing
Read More
678 Open Miniature Deep Groove Ball Bearing | Ultra-Low Torque | 8×12×3.5 mm
The 678 Open is a high-precision, ultra-thin miniature ball bearing engineered for technical applications where minimizing rotational friction is the top priority. Featuring an 8mm bore and a compact 12mm outer diameter, this "Open" configuration lacks physical seals or shields, allowing the rolling elements to rotate with nearly zero starting torque. It is the ideal choice for high-speed systems operating within enclosed, debris-free environments—such as oil-mist lubricated housings or hermetically sealed instruments—where maximum mechanical efficiency and rapid heat dissipation are required.

Hot Tags : 8×12×3.5 mm Open Bearing High Speed 678 Micro Bearing 678 Miniature Ball Bearing Frictionless 678 Ball Bearing 8mm Bore Chrome Steel Bearing Ultra Thin 6700 Series Bearing
Read More
678-ZZ Thin-Section Miniature Ball Bearing | Compact Efficiency & High Velocity | 8×12×3.5 mm
The 678-ZZ is a high-performance, thin-section miniature ball bearing designed for advanced mechanical systems where every millimeter of space is critical. Featuring dual-side metal shields (ZZ), this 8×12×3.5 mm component provides a streamlined solution for high-density layouts. The non-contact steel shields are engineered to repel dust and dry contaminants while maintaining an ultra-low friction profile. This allows the internal factory-set lubrication to operate efficiently, ensuring long-term reliability and smooth rotation in sensitive electronic and robotic assemblies.

Hot Tags : 8x12x3.5 mm Thin Section Bearing Precision ABEC-5 678ZZ Bearing Metal Shielded 678-ZZ Bearing Ultra Slim Micro Ball Bearing 8mm Bore Low Profile Bearing High Speed Brushless Motor Bearing
Read More
679 Open Miniature Deep Groove Ball Bearing | High-Speed Performance | 9×14×3 mm
The 679 Open is a precision-engineered, ultra-thin miniature ball bearing designed for high-velocity applications where rotational resistance must be kept to an absolute minimum. With a 9mm bore and a slim 14mm outer diameter, this "Open" type bearing features no seals or shields, allowing for the lowest possible starting torque and unrestricted rotational flow. This design is specifically intended for use in clean, controlled environments or within enclosed housings where external lubrication—such as oil baths or mist—is readily available to maintain the bearing’s internal components.

Hot Tags : 9×14×3 mm Open Bearing High Speed Open Micro Bearing 679 Miniature Ball Bearing Low Torque 679 Ball Bearing 9mm Bore Chrome Steel Bearing Ultra Thin 6700 Series Bearing
Read More
679-ZZ Thin-Section Miniature Ball Bearing | High Speed & Low Profile | 9×14×4.5 mm
The 679-ZZ is a specialized thin-section miniature ball bearing designed for high-precision assemblies where radial space is limited but high performance is essential. Featuring dual non-contact metal shields (ZZ), this 9×14×4.5 mm component excels in reducing rotational friction while maintaining a streamlined profile. The rigid steel shields effectively prevent the ingress of dry contaminants and ensure that the high-speed internal lubrication remains distributed across the raceways, making it an ideal choice for compact motors and sensitive electronic devices.

Hot Tags : 9x14x4.5 mm Thin Section Bearing High Speed 679ZZ Ball Bearing Metal Shielded 679-ZZ Bearing Precision 6700 Series Bearing 9mm Bore Low Profile Bearing Micro Motor Replacement Bearing
Read More
672 Open Micro Deep Groove Ball Bearing | Ultra-Miniature Precision Series | 2×5×1.5 mm
The 672 Open is an elite-grade micro-miniature ball bearing designed for applications where spatial constraints are extreme and rotational mass must be kept to an absolute minimum. As an unshielded, open-type component, this 2×5×1.5 mm bearing provides a "zero-drag" environment, allowing for instantaneous acceleration and high-frequency oscillation. Weighing approximately 0.1 grams, the 672 is the preferred choice for high-precision laboratory instrumentation, micro-optics, and nano-robotics where the slightest mechanical resistance can compromise system accuracy.

Hot Tags : 2x5x1.5mm Open Ball Bearing 2mm Bore Miniature Bearing 672 Micro Precision Bearing Nano-Robotics Ball Bearing High Speed 90000 RPM Bearing 672 Chrome Steel Open Bearing
Read More
674 Open Ultra-Miniature Ball Bearing | High-Velocity Unshielded Design | 4×7×2.5 mm
The 674 Open is a precision-engineered, single-row miniature ball bearing designed for applications where absolute minimal rotational resistance and maximum speed are the primary requirements. By removing the physical barriers of shields or seals, this 4x7x2.5 mm component allows for unrestricted lubrication flow and zero "drag," making it perfect for high-frequency vibration tools and precision instruments. With a featherweight mass of just 0.3 grams, the 674 open type excels in energy-sensitive systems where reducing mechanical friction is critical to extending battery life and improving motor response.

Hot Tags : 4x7x2.5mm Open Ball Bearing 4mm Bore Zero Friction Bearing 674 Ultra Miniature Bearing Micro Motor Unshielded Bearing High Speed 63000 RPM Bearing Precision 674 Chrome Steel Bearing
Read More
674-ZZ Miniature Deep Groove Ball Bearing | High-Precision Shielded Series | 4×7×2.5 mm
The 674-ZZ is one of the smallest standard industrial components available, a single-row miniature ball bearing designed for high-frequency rotational stability within a microscopic framework. Outfitted with dual integrated metal shields (ZZ), this 4x7x2.5 mm bearing offers a maintenance-free solution by retaining high-grade synthetic grease while shielding the internal raceways from airborne debris. Its featherweight 0.32-gram construction is specifically optimized for micro-drone gimbals, optical sensors, and precision cooling fans where minimizing starting torque is essential for system responsiveness.

Hot Tags : 4x7x2.5mm Shielded Bearing 674 ZZ Drone Gimbal Bearing 674-ZZ Miniature Ball Bearing Ultra Thin 4mm Bore Bearing High Speed Micro Motor Bearing Precision 674 ZZ Chrome Steel Bearing
Read More
675 Open Miniature Deep Groove Ball Bearing | Zero-Shield Design for Maximum Speed | 5×8×2.5 mm
The 675 Open is an ultra-miniature, single-row ball bearing designed for high-precision applications where minimal starting torque and maximum rotational velocity are paramount. Without the added friction of seals or shields, this 5x8x2.5 mm component offers an unobstructed path for lubrication, making it ideal for systems utilizing oil mist or oil bath lubrication. With a total weight of only 0.4 grams, the 675 open type is the preferred choice for high-speed spindles, precision measuring instruments, and vacuum environments where seal outgassing or drag must be strictly avoided.

Hot Tags : 5x8x2.5mm Open Ball Bearing Zero Friction 5mm Bore Bearing 675 Ultra Miniature Bearing Precision Instrument Micro Bearing High Speed 60000 RPM Bearing 675 Chrome Steel Open Bearing
Read More
675-2RS Micro Deep Groove Ball Bearing | Double Rubber Sealed for Harsh Environments | 5×8×2.5 mm
Engineered to deliver uncompromising reliability in environments prone to dust and moisture, the 675-2RS is a premium miniature ball bearing that combines an ultra-compact footprint with robust ingress protection. Featuring dual NBR (Nitrile Butadiene Rubber) contact seals, this 5x8x2.5 mm component effectively locks in the factory-filled lubricant while blocking out harmful external contaminants. Weighing exactly 0.4 grams, this highly durable micro-bearing is the definitive solution for outdoor robotics, miniature fluid pumps, and RC vehicles where environmental exposure frequently compromises standard unsealed components.

Hot Tags : 675-2RS Rubber Sealed Bearing 675 2RS RC Car Bearing 5x8x2.5 Micro Ball Bearing 5mm Bore Sealed Bearing Miniature Waterproof Bearing Precision NBR Sealed Bearing
Read More
675-ZZ Ultra-Miniature Deep Groove Ball Bearing for High-Speed Precision Devices | Dual Shielded (ZZ) | 5×8×2.5 mm
Engineered for applications with strict spatial limitations, the 675-ZZ is a premium single-row micro ball bearing offering outstanding rotational speed in an ultra-compact form factor. Featuring twin non-contact metal shields (ZZ), this 5x8x2.5 mm bearing ensures long-lasting internal lubrication while successfully blocking environmental contaminants. Weighing a mere 0.4 grams, this featherweight component is the ideal choice for micro-drones, delicate medical devices, and intricate robotics where minimizing rotational inertia is essential for peak performance.

Hot Tags : 5x8x2.5mm Miniature Bearing Ultra Thin Section Bearing 675-ZZ Deep Groove Bearing 5mm Bore Shielded Bearing High RPM Micro Motor Bearing Drone Motor Ball Bearing
Read More